Three Phase Industrial Electric Motor

YRKK series high voltage ac slip ring motor is used to drive Windlass, Press machinery, Crusher, Stock-removing, draw benches and other general-purpose machinery. They can serve as the prime movers in steel, mines, mechanical industries, blower, compressor, transportation, building materials industry, etc.

Send Inquiry

Product Introduction

Product Introduction:

The YRKK series 6KV and 10KV three-phase asynchronous motors are closed rotor three-phase asynchronous motors, and their power levels and installation dimensions conform to the International Electrotechnical Commission (IEC) standard. The motor has the advantages of high efficiency, energy saving, low noise, small vibration, light weight, reliable performance, convenient installation and maintenance and so on. The motor can provide larger starting torque under the small starting current, and the feed line capacity is not enough to start the squirrel cage rotor motor. The starting time is longer and the starting is more frequent. It needs a small range of speed regulation and other occasions. Such as dragging, rolling mill, wire drawing machine and so on. The motor structure and installation type is IMB3, rated as continuous S1 based on continuous operation, the rated frequency of the motor is 50HZ, the rated voltage is 6KV, 10KV, and other voltage levels or special requirements can be agreed with the users when ordering.

Model meaning of yrkk series high voltage motor

YRKK is a three phase industrial electric motor for a closed air space cooler with a winding type rotor

Installation method: IMB3

Rated power: 2240KW

Protection level: IP44 or IP54

Rated voltage: 6KV

Cooling mode: IC611

Rated frequency: 50HZ

Insulation grade: F grade

Synchronous speed: 1500r/min

Environmental conditions: the altitude is 1km, and the ambient temperature is 40.

Note: 4 pole motor is forbidden to drive with pulley. If belt drive is required, the manufacturer should negotiate with the manufacturer

Motor connection: Y (junction box three terminals, viewed from the main extension wiring box is positioned on the frame on the right side)

Use environment: altitude: no more than 1000m, ambient air temperature: no more than 40 C and no serious dust. The minimum ambient air temperature is -15 C for rolling bearing motor, and the motor for sliding bearing is 5 C.

No corrosive and explosive gases in the air (can also be made into hot or hot or plateau motor)